SQL Refactor 1.3 install Fails to load on SSMS 2008 R2

jallman · August 10, 2010 2:14PM

The Add0in "SQL Refactor 1.3' failed to load or caused an exception .
Error Message: ,uNKNOWN eRROR>
eRROR NUMBER: 80131513.

I uninstalled and reinstalled SQL refactor 1.3 but got the same error bringing up SSMS 2008 R2.

lcarpay · August 11, 2010 4:52AM

I got the same error as - jallman - (SQL2008R2 and W7-64bits).

The cummulative patch from Refactor 1.4 to 1.5 (having installed the latest release 1.3 !!!, how do you mean 1.4??) did fix the problem. The address of the patch is posted somewhere on the forum.

Anu D · August 11, 2010 5:37AM

You can download the latest patch from here:

http://www.red-gate.com/MessageBoard/vi ... php?t=9960

Kindly let us know whther this fixed the issue or not.

mnowill · August 23, 2010 1:40PM

I am unable to get the "Manual Activation" window to display. I go to enter my serial number and it then goes to try and connect to the Activation Server and it just sits there. The server has no network connect so I expect it to fail after a few moments and then offer me the standard "Manual Activation" but that never happens.

Any help would be appreciated. This is with the Cumulative Patch with the R2 fix listed in the link provided by Anu.

Anu D · August 23, 2010 1:46PM

Thanks for your post.

Can you leave the window open till it comes with an error (in the error window it comes up with an option to activate manually)?

And also make sure you are not connected to internet?

mnowill · August 23, 2010 2:00PM

I left it open for over an hour and nothing happened...

tgoldstein@co.arapahoe · August 31, 2010 5:01PM

The Cummulative update fixed the issue with Refactor in SSMS 2008 R2 for me.

Tim Goldstein
Denver, CO

sqlchicken · October 5, 2010 11:58PM

Just wanted to post here, I had same issue with 3.1 and the CU patch worked for me. SSMS 2008 R2 (Win7 x64)

LehighDBA · October 11, 2010 1:41PM

Me Too -->

Just wanted to post here, I had same issue with 3.1 and the CU patch worked for me. SSMS 2008 R2 (Win7 x64)

RBeaubien · October 25, 2010 2:35PM

Are you guys going to be rolling in the updated changes to Refactor for SSMS 2008 R2 support in the main toolbox installer?

neuracnu · November 22, 2010 2:28PM

Hello? Is there anybody in there?

How about posting this update someplace where customers can get to it? I've seen a couple of versions available online (through yousendit, rapidshare and the like), but I'd prefer to get this sort of thing from Red Gate directly.

Anu D · November 23, 2010 4:25AM

Thanks for your post.

We upload all our patches either on our website or on our forums.

You can download the latest patch for SQL Refactor from here:

http://www.red-gate.com/MessageBoard/vi ... php?t=9960

We never upload our products on yousendit, rapidshare, etc (I won't recommend to download from these websites) so if you need any help regarding our tools kindly post it on our forums as they are administered by us.

Let us know whether you were able to download the patch from the link I specified above.

neuracnu · December 2, 2010 5:59PM

Anu Deshpande wrote:

Thanks for your post.

We upload all our patches either on our website or on our forums.

You can download the latest patch for SQL Refactor from here:

http://www.red-gate.com/MessageBoard/vi ... php?t=9960

Yes, I read that. The download link in that thread (ftp://support.red-gate.com/Patches/SQL_ ... _Patch.zip) does not work and appears to have been down since May 2010 - the FTP site is dead. Can we get a working link to it?

monkeygrind · December 29, 2010 5:01PM

I just tried it and it worked fine for me.(Win2k8, SQL2k8R2). So it's active again, I think.

SQL Refactor 1.3 install Fails to load on SSMS 2008 R2

Comments

Product Learning

Community Forums

Events & Friends

Simple Talk